Barnwell Plastic T Handle Carpet BolsterThis is a Barnwell plastic t handle bolster The bolster allows you to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. The plastic boslter is lightweight and strong bolster reducing the risk of damage making it great to use on carpet and stairs. The bolster has a comforable T handle grip. The bolster has one offset pointed corner to and one round corner to help protect

The plier is VDE tested to 1000v

The roll is 100 meters long which is 320ft

This is a Barnwell bent long nose plier

1 x 17mm socket

making it ideal when working in tricky areas

This is for 5 pins and 5 o-rings

This is a Pack of 3 Barnwell Dolphin knives with a White finish

Fine orange sponge

This is a Pack of 3 Barnwell Dolphin knives with a Candy Blue finish

The extension bar end is 19mm in diameter and has two flats where your machine with lock into it and it has two screws to hold you cutter tight

The outer diameter of the extension bar is 35mm so if you want to get into a deep hole it will have to be a minimum of 35mm

The socket has a thin wall allowing it to be used in the standard 41mm x 41mm Unistrut The socket must be used with a pin and ring which is NOT included